puren FD-L 

puren FD-L insulating elements are particularly suitable for flat roofs with slim roof  structures.

puren FD-L

puren FD-L insulating elements TCG (WLS) 023/024

made of high-performance PUR/PIR (polyurethane) rigid foam insulating material, DIN EN 13165, TCG (WLS) 023/024, application type PUR 023 DAA dh or DEO dh, PUR 024 DAA dh or DEO dh, with pure aluminum outer layer on both sides.

  • Low superstructure because of high thermal insulation (TCG (WLS) 023/024)
  • To be installed using solvent-free puren roof adhesive
  • B2 class building material acc. to DIN 4102
  • Does not smolder, melt or drop off while burning
  • sd-value > 1500 m (vapor-tight)
  • Improved thermal reflection due to metallic outer layer
  • High compression strength, compressive stress at 10 % compressive deformation acc. to DIN EN 826: > 100 kPa / > 150 kPa **
  • Water-repellent and resistant to chemicals
  • Insulation element can be used from both sides for economical installation with low cut-off waste
  • Water absorption acc. to DIN EN 12087: approx. 3 % by volume
  • Good resistance to ageing
  • Low weight
  • THR600 ≤ 7,5 MJ (1200x2400 mm) (with a thickness of 80 mm)

Available formats:
Outer dimensions wide 1200 x 600 mm (Außenmaß)
Fitting dimensions wide 1185 x 585 mm (Einbaumaß)

60 - 200 mm

You have more questions ?

Please contact here your Regional Sales Manager.

** Higher compressive strength > 150 kPA upon request.



Declarations of Performance